Complete brick making line

Clay brick making linedescription:About products:This block shaping machinery adopts the design of the strong combine, the principle axis bearings of the extrusion system and the mud vacuum chamber are connected for integral whole, which aims to keep the coaxially of the main shaft. Thus, the extrusion will be uniform with strong extruding pressure and small wave motion. In addition, it also adopts the design of flexible top and bottom combinative form. The top side is used to compress the mire in advance to guarantee high vacuum degree, thus, the brick will be more dense and solid. It's applicable to make all kinds of hollow bricks with raw material of coal gangue, shale, fly ashes and clay. About brick making line: 1. Brick raw materials should be prepared. Such as clay, fly ash, coal gangue, shale and so on. 2. Brick factory should be built. The yard of brick plant should be in agreement with the productivity of bricks. 3. The size of bricks should be in agreement with the local standard. 4. The model of bricks should be choosed, solid brick or hollow brick, If is hollow brick, how many holes on the brick. 5. The kiln for drying and firing bricks should be arranged, the tunnel kiln, annular kiln with dry hole or annular kiln. Technical parameters: Power110KWWeight6t-8tExtrusion pressure2.5MPaVacuum degree-0.092MPaSpare partsDrift and mouldPreferential termsOffer vacuum pump, air compressor freelyStandard solid brick size240*115*53mmStandard hollow brick size240*115*90mmProductivity10000-12000 Pcs/h(convert to standard brick)